Watch the bulb shape #
Cars use more bulbs than you might think. There are several bulb types, so you need to check what lamp is used at the spot you are replacing.
| ■Disclaimer The articles on TireSize.net are the author’s own installation records. The author is not responsible for any trouble arising from work done based on this site. When doing the work, be careful of the risks of burns, electric shock, and injury. |
|---|
Bulb shapes #
I removed the bulbs from the car and checked their shapes.
| The room lamp was T10 x 31. The 31 means a length of 31 mm. It is a two-base type, but there are various lengths, so be careful. Even if you buy what looks similar, a difference of a few millimeters can mean it won’t fit, so confirm before buying. |
![]() |
|---|---|
| The door lamp and trunk light were T10. | ![]() |
| — | — |
| The driver/passenger map lamps were bayonet-base bulbs. My car was BA9S (BA: pins parallel, 9: base diameter 9 mm, S: one contact), but there are several pin positions and diameters, so be careful. | ![]() |
| — | — |
Buying the replacement parts #
The trunk lamp was dim and I wanted it brighter, but while I was at it I also replaced the room lamp and door lamp.
- For the room lamp / trunk — 24 LEDs, with an adapter coupler fitting 3 types (T10 / BA9S / T10 x approx. 29 mm to approx. 41 mm telescoping). (See on Amazon)
- For the door lamp — A 5-LED type. (See on Amazon)
I bought the 24-LED ones as a 2-pack. It said 3 adapter couplers were included, and I wasn’t sure if that was per set or per pack, but each one had them. Double-sided tape on the back of the LEDs let me fix them in the trunk too.

For the T10 I chose the 5-LED ones. Simple packaging, which also kept the shipping cheap. 
— To look up the bulb shapes used in a car, the following page is handy. Koito - Bulb compatibility table by vehicle model
Replacing the trunk bulb #
For comparability, I fixed the shutter at 1/60 and the aperture at f3.5. The look to the eye was close to this, so I shot with these settings. First, the standard bulb. A little dim - the light barely reaches the edges - and I wanted more brightness.
![]() |
|---|
| Changed to the 5-LED T10. Surprisingly bright. I also bought the 24-LED, but this may have been the better choice. |
![]() |
| — |
| Changed to the 24-LED. Of course, brighter than the 5-LED. I fixed it with the included double-sided tape. The tape may eventually peel, so the fitting 5-LED T10 might be the better choice. But since I bought the 24-LED, I’ll keep using it for now. |
![]() |
| — |
Replacing the room lamp #
This is the standard brightness. It’s not that dark, but I swapped it anyway to try.
![]() |
|---|
| Replaced with the 24-LED. It got brighter. The light changed from a warm bulb color to blue-white, which changes the impression quite a bit. People who prefer warm-color LEDs may not like it. |
![]() |
| — |
Replacing the door lamp #
To be honest, I had felt the door lamp was dim before, so I replaced it too. It was a T10, so I fitted the 5-LED I bought.
The difference is hard to see in photos, but it got quite a bit brighter. The whiter color may add to the sense of brightness, but the brightness gain was definite.

Impressions after swapping #
Because I chose higher-output LEDs, the result was a brightness I could really feel. The trunk and door lamps had been underwhelming, and this change solved that.








