↓ Skip to main content
Sitemap
  1. Car DIY/

Front emblem swap

Author
TireSize.NET
Table of Contents

I swapped the front emblem. How the emblem is attached differs by vehicle model, so it is important to check in advance whether you can swap it yourself. The Mark II I swapped this time is only held on with clips once the grille is removed, so I could swap it just by unfastening the 3 bolts holding the grille.

Sourcing the part
#

The emblem before the swap was the star-mark emblem. Since I was swapping it anyway, I wanted to change the look, so I decided to put on a Toyota mark. Looking for an emblem that would fit this need, I found the one below and bought it. I bought a front Toyota-mark emblem for a Corolla (nze141-01). It is a part for a different model, so I had to work out the mounting myself.

The result
#

The emblem was just clipped onto the grille, so once the grille was off it came right out. The problem was how to mount it. It has to withstand engine heat and vibration for a long time and not come loose easily. This time I mounted it with outdoor-grade double-sided tape. Since it is a genuine Corolla part, there were a few mounting clips on the back; I used one and cut the rest off. The look has changed a bit. By the way, peering in from above, it protrudes a little, but it doesn’t look out of place.